Produktinformation
Borstlös servo som kan köras direkt på 2-4S LiPo. Vid 11,1V drar den 63 kg på 0,12 sekunder. Vid 14V drar den 76g på 0,11 sek.
PS! Produkttexten är maskinöversatt från norska.
Vikt | 89 Gram |
Storlek | 40X20x40mm |
Splines | 25T Futaba |
Effekt/hastighet 11,1V | 63 Kg 0,12 sek vid 1 cm |
Effekt/hastighet 14V | 76 Kg 0,11 sek vid 1 cm |
Spänningsområde | 6-16V |
Product details in english
The brushless SHV650 servo is designed for R/C Rock Crawlers, but at home in any vehicle that needs high torque with ultra fast speeds. It is powered directly by a 2S to 4S LiPo battery via JST connection on your ESCs battery plug, eliminating the need for an external BEC! Clean up your wiring, gain space in a tight rig, and enjoy massive performance from the high quality brushless motor and circuitry.
FEATURES:
Water resistant Alloy Case with O-Ring Seals
Waterproofed internals
All steel machined gears with proven pin strength
Upgraded Brushless motor with 200C rated magnets
30cm radio signal lead
JST connector for direct power
2s to 4s LiPo battery compatible, 6 volt to 16.8 volt range
SPECIFICATIONS:
Weight:89g
Dimensions: 40x20x40mm
Spline: 25 tooth (Futaba type) M3 threaded
Torque @ 11.1v: 875 oz/inch
Speed @ 11.1v: 0.12 sec
Torque @ 14v: 1055 oz/inch
Speed @ 14v: 0.11 sec
If using an ESC with a power switch, the battery must be disconnected from the ESC and servo when not in use to prevent damage to the servo and/or battery. Do not connect the servo directly to the battery balance port. Doing so can damage the servo and will void the warranty. Moly (marine) grease is recommended when lubricating the gears. Dielectric grease is recommended inside the back of the servo if looking to increase water resistance for long term submersion.
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!