Produktinformation
Extern spänningskabel R7003SB, R7008SB och R7018SB (CA-RWIN-700)
PS! Produkttexten är maskinöversatt från norska.
Används för att ansluta telemetrimottagaren till en extra spänningsport
Paketinnehåll:
- Kabel (700 mm)
- Säkring
- Krymp strumpor
- Manuell
Kabeln är ansluten till R7008SB bredvid antennen.
Den mäter den externa spänningen, till exempel på drivbatteriet. Spänningen visas på sändarskärmen som "EXT-VOLT".
Tål en maximal spänning på 70V.
Product details in english
This is the Futaba CA-RVIN-700 External Voltage Input Cable.
Features:
Used to connect a Futaba telemetry equipped receiver to an extra voltage port.
Includes:Cable, Fuse, Heat Shrink Tube and Instructions
Specifications: Length: 700 mm
Comments:This voltage cable plugs into the R7008SB next to the antenna.This measures the external voltage, such as the battery that is running a motor. The voltage will be displayed in the transmitter as "EXT-VOLT".Maximum voltage is 70 volts.Cable should be cut to desired length, then remove & save 30mm from the positive black line. Next, solder the fuse inline on the positive wire and reattach the section of wire that was previously removed and solder into place. The fuse should be attached as close to the external power supply as possible. Place shrink tubing over the fuse and cover all sodered areas. Shrink the tubing onto the wire with a heat gun. The cables will then be connected to corresponding + & - wires that connect the ESC to the battery and attached using solder and shrink tubing.
Mer info på engelska